New Holland LS140 Workshop Manual page 613

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

8. Remove the pin retaining hardware and pin from

the link and main boom. Lower the link down and

rest it on the loader frame.

9. Loosen the right and left upper link rear retaining

bolts, 1; do not remove. With a soft-faced sledge

hammer, strike the link at 2, to break the tapered

pivot pin loose in the main boom.

10. Remove the hardware and pins from the link,

then rest the link on the lower link.

11. Lift the boom assembly from the loader.

Chapters

Table of Contents