d. Remove the inner brake friction puck, 1, and
the spacer plate, 2. The inside caliper, 3,
does not need to be removed.
12. Loosen the hydrostatic motor retaining bolts, 1,
and chain adjusters, 2. This will loosen the prima-
ry drive chain enough for removal.
13. Remove the primary drive chain, 1, from both the
motor drive sprocket, 2, and the intermediate
drive sprocket, 3.
14. Remove the drive sprocket retaining ring, 4, and
the motor drive sprocket, 2.
15. Remove the intermediate drive sprocket retain-
ing ring, 5, and drive sprocket, 3. These can be
removed without removing the final drive double
sprocket, 6.
SECTION 44 - AXLES AND WHEELS
44-19
Copyright © New Holland
35
36
37