13. Remove the brake disc retaining ring, 1, and
loosen the brake caliper attaching bolts at 2. Re-
move both brake discs, 3, and remaining brake
caliper parts.
14. Loosen the motor attaching hardware, 1, and ad-
justing bolts, 2, enough to slide the motor rear-
ward and remove the primary drive chain, 3.
15. Remove the inner retaining ring at 4, and slide
drive sprocket, 5, off the motor shaft.
16. Remove the high-pressure hoses, 1, and case
drain lines, 2, from the motor and cap to prevent
loss of oil. Remove the motor attaching hard-
ware, 3, and adjusting bolts, 4. Remove the mo-
tor and seal plate from the machine.
SECTION 29 - HYDROSTATIC TRANSMISSION
29-51
Copyright © New Holland
97
98
99