New Holland LS140 Workshop Manual page 405

Hide thumbs Also See for LS140:

Table of Contents

23. Remove the bearing cups, 1, if damaged or worn.

Use a hammer and suitable driver to drive them

from the hub.

Front Drive Chain and Sprocket Removal

24. With the intermediate shaft assembly removed,

slide the chain and sprocket to the center of the

chain case opening. Remove the chain from the

sprocket and then remove the chain from the

25. Remove the drive sprocket from the case noting

the position of the sprocket center hub, 1 (short

or long shoulder either in or out). The front

sprocket should have the long shoulder to the

Rear Chain Drive and Sprocket Removal

26. Removal of the intermediate shaft assembly, 1,

is not required to remove the rear drive chain and

27. Slide the rear chain and sprocket to the chain

case opening, remove the chain from the sprock-

et and then from the case.

28. Remove drive sprocket, 2, from the case noting

the position of the sprocket center hub, 3 (long or

short shoulder in or out). The rear sprocket

should have the long shoulder to the inside.

SECTION 44 - AXLES AND WHEELS

Chapters

Table of Contents