New Holland LS140 Workshop Manual page 408

Hide thumbs Also See for LS140:

Table of Contents

4. Install the front drive chain, 1, over the drive

sprocket, 2.

NOTE: NOTE: The front drive chain is shorter than

the rear drive chain.

5. Slide the chain and sprocket toward the front of

the chain case.

6. Install the rear drive sprocket, positioning the lon-

ger half of the center hub, 1, to the inside - of the

7. Install the rear drive chain, 2, over the drive

NOTE: NOTE: The rear chain is longer than the front

drive chain.

8. Slide the chain and sprocket to the rear of the

Primary Drive, Intermediate Shaft Reassembly

9. If removed, reinstall the bearing cups, 1, into the

intermediate shaft hub, using a suitable hammer

10. Repack the intermediate shaft bearings with

New Holland high viscosity lithium grease and

install the inner bearing onto the shaft.

SECTION 44 - AXLES AND WHEELS

Chapters

Table of Contents