New Holland LS140 Workshop Manual page 262

9. Remove the jam nut and bolt, 1, from arm, 2, and
slide the arm from shaft, 3.
10. Remove the caliper support retaining bolt, 4, and
remove the support from the skid steer.
11. Rotate the caliper shaft, 3, and remove from the
support.
Brake Caliper and Disc Parts Inspection
Thoroughly clean all parts of sealing material etc. be-
fore inspection.
Brake caliper and related parts
Ref Description
1 Brake disc retaining ring
2 Brake disc (2)
3 Brake puck (1)
4 Spacer plate (1)
5 Center caliper plate
6 Bushings
7 Outer caliper section
1. Inspect the brake disc for wear in the clamp area,
1, and splines, 2. The disc should also be flat. If
worn severely or bent, replace.
SECTION 33 - BRAKES AND CONTROLS
33-15
Copyright © New Holland
28
29
30