New Holland LS140 Workshop Manual page 369

Hide thumbs Also See for LS140:

Table of Contents

6. Remove the right and left headliner supports re-

taining hardware, 1, and remove both supports

and headliner, 2.

7. Remove the fuse panel retaining hardware and

lower the fuse panel.

DO NOT remove any wires from any switches or

fuse blocks.

8. Remove the ignition switch panel hardware 1,

and lower the switch panel.

DO NOT remove any wires from any switches.

9. Remove any ground wires attached to cab

ground terminal at 1.

10. Remove any wire harness ties or clamps in the

upper cab area at this time. Remove the wire har-

ness, fuse and switch panels from the right cab

11. If the unit is equipped with front lights, the light

harness and light bulbs must be removed.

Touching the light bulb element may damage the

element and cause a premature failure.

SECTION 39 - FRAMES

Chapters

Table of Contents