General Information - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

GENERAL INFORMATION

Power for the skid-steer loader ground drive is trans-

mitted from the engine through a flex plate drive cou-

pler to the hydrostatic pumps, 1. The hydrostatic

pumps then transmit hydraulic fluid power to the hy-

drostatic motors at 2, which are connected to the in-

side of the final drive chain cases. The right and left

hydrostatic drives are separate from each other and

operate independently by use of hand controls.

Power is then transmitted from the motors through

the primary drive chain and sprocket, 1, to the double

chain and sprocket at 2. Endless chains, 3, one to

the front and one to the rear, transfer the power to the

axle sprockets.

Axle sprocket, 1, is splined to the axle shaft and hub

assembly, 2. The sprocket is not retained to the axle

shaft and will self-align during machine operation.

SECTION 44 - AXLES AND WHEELS

Table of Contents