New Holland LS140 Workshop Manual page 221

Hide thumbs Also See for LS140:

Table of Contents

Control Linkage Parts Inspection

1. Inspect the bushings, 1, in the control links; re-

place if worn, loose, or damaged.

2. Inspect the sealed bearings, 1, and small bush-

3. Inspect the rubber bushings, 3, in the pintle arms;

if loose or worn, replace. Inspect the pintle arms

in the clamping area for wear or damage; if worn

or damaged, replace.

SECTION 29 - HYDROSTATIC TRANSMISSION

Chapters

Table of Contents