New Holland LS140 Workshop Manual page 192

Hide thumbs Also See for LS140:

Table of Contents

7. Reconnect all steering linkages and neutralizer

8. Reinstall the control levers if removed. Refer to

the operator's manual for neutral adjustment pro-

cedure and adjust the steering control levers for

9. Refer to the "Start-Up Procedure" after a rebuild

section of this manual for the start-up procedure.

10. Put the Service/Run switch in the "SERVICE"

11. Operate the unit and check for oil leaks and re-

Securely support the skid-steer loader with all

four wheels off the ground, or movement of the

loader may cause serious injury or damage to the

12. Tilt the cab and boom back into position, if tilted

13. Reinstall the step shield, fenders, etc. removed

for the repair.

14. Fill the hydraulic system (reservoir) with SAE

SECTION 29 - HYDROSTATIC TRANSMISSION

Chapters

Table of Contents