Priming The Fuel System - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

PRIMING THE FUEL SYSTEM

The skid steer is equipped with an electric fuel pump,

1. If the engine has been run out of fuel, add a

minimum of 5 gallons (18.9 L) fuel to the tank.

Put the Service/Run switch, 1, in the SERVICE

position. Remove the fuel line, 2, Figure 148, at the

injector pump.

Turn the ignition switch to the RUN position and allow

the electric fuel pump to pump fuel until a full stream

of fuel (no air) flows at 2. Reinstall the fuel line. Now

start the engine and allow the engine to run until the

injection pump self bleeds the air from the pump.

SECTION 10 - ENGINE

Table of Contents