V-Belt, Fan Pulley and Cooling Fan
After mounting the fan pulley, cooling fan, spacers,
and cover plates, 1, install the V-belt.
Depress the belt at the center between the
crankshaft pulley and the alternator pulley, with a
force of approximately 5 kg (2.27 Ibs). The fan belt
tension should be adjusted so the deflection
becomes 5 mm (0.2") upon the above check.
Cooling fan tightening torque:
8.8 - 13 N⋅m (6.5 - 9.5 ft. lbs.)
Intake/Exhaust Manifolds
Install in sequence of gasket, 1; spacer, 2; gasket, 3;
and intake manifold, 4.
Install exhaust manifold, 5.
SECTION 10 - ENGINE
10-78
Copyright © New Holland
130
131