New Holland LS140 Workshop Manual page 195

Hide thumbs Also See for LS140:

Table of Contents

10. Drain the hydraulic reservoir.

a. Loosen the return line clamp, 1.

b. Remove the return line at 2, and rotate the

line into a suitable drain pan.

11. Remove the fender, 1, on the side the motor is

being removed from. Remove the final drive cov-

er, 2, to access the parking brake.

12. Remove the rear axle retaining hardware, 1, and

axle assembly, 2. This will loosen chain, 3,

enough to remove the chain from the drive

sprocket at 4.

SECTION 29 - HYDROSTATIC TRANSMISSION

Chapters

Table of Contents