New Holland LS140 Workshop Manual page 595

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

BOOM/CYLINDER PIVOT PINS SIZE

NOTE: After the tapered pivot pin retaining hardware

is torqued, the pins must be properly seated. Using

a hammer, strike the head of the bolt and pin several

times to seat the tapered pin in the taper of the boom

and/or ROPS. Retorque the hardware to the speci-

fied torque. Repeat this process until the torque is

95 mm (3-3/4I)

38 mm (1-1/2I)

72.3 mm (2-7/8I)

38.1 mm (1-1/2I)

57.8 mm (2-9/32I)

38.1 mm (1-1/2I)

33 mm (1-19/64I)

44.3 mm (1-3/4I)

64 mm (2-33/64I)

44.3 mm (1-3/4I)

104 mm (4-3/32I)

25.4 mm (1I)

112.5 mm (4-7/16I)

92 mm (3-5/8I)

79 mm (3-7/64I)

110 mm (4-21/64I)

Chapters

Table of Contents