10. Torque the front bolts, 1, to 190 N·m (140 ft. lbs.).
11. Reinstall the parking brake linkage, 1, with cotter
pins, 2.
12. Install fenders, 1, engine shields, 2, and front
step shield, 3.
13. Tighten the rear fender support bracket
hardware at 4.
14. Remove the cab jack and supports.
15. Reconnect the battery cable.
WARNING
Never attempt to operate or move the skid steer
without first installing and properly tightening all
cab retaining hardware.
SECTION 00 - GENERAL INFORMATION
19992572
00-25
1
2
Copyright © New Holland
35
2
36
37