New Holland LS140 Workshop Manual page 400

Hide thumbs Also See for LS140:

Table of Contents

4. Remove the tires and wheels from the final drive

being serviced.

5. Clean the axle and final drive area to prevent de-

bris from entering the final drive case.

6. Remove the eight axle housing retaining nuts

and washers, 1, from each axle.

7. Slide the axle housing from the retaining studs

and lift the assembly from the final drive case.

NOTE: NOTE: When the axle assembly is removed,

the drive sprocket and chain will drop slightly, to the

bottom of the chain case.

8. A large O ring, 1, seals between the axle housing

and the side of the final drive case. Remove the

O ring from the case or the axle housing.

9. Remove the final drive cover, 1, to access the

drive chains and brake assembly.

SECTION 44 - AXLES AND WHEELS

Chapters

Table of Contents