New Holland LS140 Workshop Manual page 65

Hide thumbs Also See for LS140:

Table of Contents

Op. 10 102 46

FRONT END PLATE ASSEMBLY

Remove the retaining bolts and lift the front plate off

its locating dowels. Remove the gasket and discard.

Op. 10 304 06

DIPSTICK ASSEMBLY

Loosen the retaining bolts and remove the assembly.

Op. 10 304 44

Remove all bolts, lower sump, and discard the

SUCTION PIPE AND STRAINER

Remove two securing bolts. Rotate the suction pipe

out of its bore.

Op. 10 105 10

CONNECTING ROD AND PISTON

1. Loosen the connecting rod nuts and remove the

2. Remove any ridge from the cylinder bore. Push

the piston and connecting rod through the

cylinder block. Replace the rod cap on the

connecting rod. Keep together in cylinder

SECTION 10 - ENGINE

Chapters

Table of Contents