New Holland LS140 Workshop Manual page 331

7. Install the drive gear, 1, into the housing, 2. Install
the idler gear, 3, into the housing. Rotate the
gears to help slide them into the gear pockets.
8. Install the pump back plate, 1, over the gear
shafts. Check that the reference marks made
during disassembly align correctly.
9. Install the housing hardware with the four bolts
with sealing washers, 1, on the inside bolt holes,
2, with the remaining bolts installed in outside
holes, 3. Torque the bolts evenly in a criss-cross
pattern to 34 - 38 N·m (25 - 28 ft. lbs.).
SECTION 35 - HYDRAULIC SYSTEM
19984493
19984494
35-62
1
3
1
2
Copyright © New Holland
2
3
88
1
89
90