4. Remove the voltage regulator assembly, 1, and
rectifier assembly, 2.
Op. 55 301 14
Alternator Component Tests
Rotor
1. Inspection of slip ring surface, 1.
Polish discoloration or scratches on the slip ring
surface with 400# - 600# grit sandpaper.
Replace a badly roughened slip ring or a slip ring
worn down beyond the service limit.
2. Check for continuity between both slip rings. If
there is no continuity, the field coil is defective.
Replace the rotor assembly.
SECTION 55 - ELECTRICAL SYSTEM
SM463-173
55-135
Copyright © New Holland
2
1
190
191
192