New Holland LS140 Workshop Manual page 625

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
3. Insert the latch pin, 1, with the tapered side to-
wards the loader boom, away from the attach-
ment.
4. With a hammer and punch, drive the grooved pin
through the lower spring guide and latch pin at 2.
5. Reinstall the spacer washer and cap screw at 1.
6. Reinstall the boom mounting plate if removed.
Torque the pivot bolts, 1, to 108 N·m (80 ft. lbs.).
The tapered pivot pins and retaining hardware
must be hammer seated by striking the head of
the bolt and pin, 2, and retorquing the bolt. This
step must be repeated until the torque is main-
tained.
82-36
Copyright © New Holland
80
81
82