New Holland LS140 Workshop Manual page 394

10. Shown here are the related parts used in the axle
assembly.
Ref. Description
1 Housing
2 Axle and hub assembly
3 Outer seal
4 Outer bearing assembly
5 Inner bearing assembly
6 Shims
7 Retaining ring
8 Inner seal
9 Outer seal sleeve
10 O ring
PARTS INSPECTION
Thoroughly clean all parts before inspection.
1. Inspect the housing flange, 1, bearing race
areas, 2, and replaceable seal sleeve, 3. Re-
place the seals and replaceable seal sleeve if
worn or damaged.
2. Inspect the axle shaft and hub assembly.
a. Inspect the bearing areas, 1, for wear.
b. Inspect the splines, 2, and retaining groove,
3, for wear.
c. Inspect the seal area, 4.
SECTION 44 - AXLES AND WHEELS
44-11
Copyright © New Holland
15
16
17