General Specification - Left-Hand Instrument Cluster - New Holland 200 Series Service Manual

General specification - Left-hand instrument cluster

L213
L216
(1) HVAC DIAL
Rotate this dial to adjust temperature.
(2) FAN SWITCH
Rotate this dial to activate the fan.
(3) AIR CONDITIONING SWITCH
The lamp will illuminate, to confirm the
system is operational, once the fan switch
has been activated.
(4) TURN SIGNAL INDICATOR
Indicates directional turn signal operation
when flashing.
(5) HYDRAULIC ATTACHMENT COUPLER
SWITCH
Push the unlock side of this switch to unlock
the coupler from the attachment. This switch
must be used in conjunction with hydraulic
pressure from the lift arm down, attachment
curl in or auxiliary.
To Lock: with the coupler properly inserted
in the attachment, apply hydraulic pressure
from the lift arm down, attachment curl in
or auxiliary making sure that the hydraulic
system goes over system relief to set lock
pins.
(6) 2 SPEED INDICATOR
Indicates 2 speed system is in use.
(7) ROTATING BEACON SWITCH
If equipped, push the switch to activate the
rotating beacon.
(8) HAZARD FLASHER SWITCH
If equipped, push the switch to activate the
4-way flashers.
INTRODUCTION
NA
NA
47712044 29/04/2014
18
1
RAPH12SSL0031DA