New Holland LS140 Workshop Manual page 130

12. Remove the front, 2, and rear, 3, tank support
hardware.
13. Remove the fuel tank from the bottom of the
engine compartment.
Op. 55 410 80
FUEL LEVEL SENDER
1. Support the boom on the boom lock pins.
2. Open the rear door and remove the left engine
side shield.
3. Unhook the wires from the sender, 1.
4. Remove the sender retaining screws, 2, and
remove the sender, 3, assembly from the tank.
Op. 10 214 12
FUEL TANK PICKUP TUBE
1. Support the boom on the boom lock pins.
2. Open the rear door and remove the left engine
side shield.
3. Remove the suction line from the pickup tube, 1.
4. Unthread the tube, 2, from the tank. Upon
reinstallation of the tube, seal the threads with
thread sealer.
SECTION 10 - ENGINE
10-95
Copyright © New Holland
155
156
157