Broken Alternator/Water Pump Belt Warning - New Holland LS140 Workshop Manual

If a fault occurs for more than 30 seconds in the
following monitored functions the EIC will signal the
operator with a flashing light, a continuous audible
alarm and will stop the engine after 30 seconds of
operation.
FAULT
1. Engine Oil Pressure
2. Hydrostatic Transmission Charge Pressure
If a fault occurs in one of these functions, the engine
can be restarted and the skid steer moved to a safe
inspection area with the boom resting on the boom
lock pins or on the ground. If the fault still exists, the
EIC will stop the engine after another 30 seconds.
IMPORTANT: Use caution when restarting the skid
steer because of the possibility of NO LUBRICATING
OILS for the engine and/or the hydrostatic
transmissions. DO NOT restart the skid steer more
than once or operate the engine at high engine
speeds. Damage to the engine and/or transmission
may occur. Contact your New Holland dealer for
assistance.
SECTION 55 - ELECTRICAL SYSTEM
BROKEN ALTERNATOR/WATER PUMP BELT
WARNING, 3
If the drive belt breaks the EIC will signal the operator
with
accompanied by an audible alarm.
NOTE: The engine will shut down automatically.
Then immediately turn the ignition key to "OFF"
position to prevent engine overheating or damage.
55-29
2
1
the battery symbol light,
Copyright © New Holland
3
19
3, flashing,