New Holland LS140 Workshop Manual page 558

Hide thumbs Also See for LS140:

Table of Contents

Op. 55 301 10

1. Raise the boom and rest it on the boom lock pins,

1. Open the rear door, 2; raise the top engine

shield, 3; and remove the right engine side

shield, 4, to access the alternator.

2. For easier access, remove any attachment from

the loader boom face plate, raise the boom and

rest it on the boom lock pins.

Never work under a raised boom unless it is

properly supported by the boom lock pins.

Never work under a raised boom with an

attachment. Always remove the attachment from

3. Disconnect the negative (–) battery cable to

prevent possible damage to the alternator and

electrical system.

4. Disconnect the wire connections from the

alternator while noting their location, 1.

5. Remove the top strap retaining hardware, 2, and

lower pivot, 3.

SECTION 55 - ELECTRICAL SYSTEM

Chapters

Table of Contents