New Holland LS140 Workshop Manual page 22

7. Remove fenders, 1, right and left sides.
8. Remove the front step shield, 2.
9. Remove the front engine shield supports, 3, right
and left sides.
10. Raise the seat and lock in the up position, 1.
Make sure the seat pan assembly is latched
securely.
CAUTION
Do not work under the seat and pan unless it is
properly latched in the raised position.
11. Remove the cotter pins from the parking brake
linkage at 1, unhook link rod, 2, and raise the
parking brake lever to the engaged position.
SECTION 00 - GENERAL INFORMATION
19992572
00-21
2
1
Copyright © New Holland
23
24
1
25