New Holland LS140 Workshop Manual page 622

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
4. Moving the latch handle, 1, align the groove pin,
2, in the setscrew hole, 3. Drive out the groove
pin with a hammer and punch.
5. Remove the latch pin, 4, from the bottom of the
mounting plate.
6. Remove the latch handle pivot bolt and spacer,
5.
7. Remove the handle/spring assembly, 1, from the
plate.
8. Repeat the procedure for both the right and left
sides.
82-33
Copyright © New Holland
73
74