New Holland LS140 Workshop Manual page 583

Hide thumbs Also See for LS140:

Table of Contents

Reassemble the starter in the reverse order of

disassembly. Observe the following cautions and

1. Lubricate the following components with a light

coating of White Lithium Grease (Part Number

Idler gear retainer and rollers.

Overrunning clutch.

Steel ball and return spring.

Armature bearings.

Reduction gears.

2. Install the return spring into the electric solenoid

and the steel ball into the center of the

overrunning clutch. The ball should be held in

place by the coating of grease.

3. Install the idler gear bearing rollers and retainer.

SECTION 55 - ELECTRICAL SYSTEM

Chapters

Table of Contents