New Holland LS140 Workshop Manual page 318

Hide thumbs Also See for LS140:

Table of Contents

1. Install O rings, 1, in the boom control spool ports,

the bucket control spool ports, and auxiliary con-

trol spool ports.

2. Install the O ring seals, 1, on the boom circuit re-

lief valve, 2, and all the plugs, 3.

3. Install small O rings, 4, and backup rings, 5, on

the relief valve and plugs.

4. Install the boom circuit relief valve, 1, into the

5. Install the plugs, 2, over the bucket and auxiliary

SECTION 35 - HYDRAULIC SYSTEM

Chapters

Table of Contents