New Holland LS140 Workshop Manual page 237

Hide thumbs Also See for LS140:

Table of Contents

10. Boom hydraulics control - Remove the locknut, 1,

and bolt, 2, to separate the handle, 3, from the

handle support, 4. Retain the bushing and caps-

crew. Remove the ball end, 5, from the handle by

removing the capscrew, 6, flat washer and lock-

nut. Remove the ball end, 5, and jam nut, 7, from

Bucket Control Handle

11. Bucket control - Remove the nuts, 1, lock wash-

ers, and carriage bolts securing the handle sup-

port to the handle tube. Remove the handle sup-

port, 2, and control rod, 3, from the handle tube,

12. Bucket control - Remove the locknut, 1, and bolt

to separate the handle from the handle support.

Remove the ball end, 2, from the handle by re-

moving the capscrew, 3, flat washer and locknut.

Remove the ball end, 2, and jam nut, 4, from the

SECTION 29 - HYDROSTATIC TRANSMISSION

Chapters

Table of Contents