New Holland LS140 Workshop Manual page 669

SECTION 90 - PLATFORMS, CAB, BODYWORK, AND DECALS
7. WARNING: KEEP CLEAR! ROTATING
FAN - STOP ENGINE.
PART #9828825
8. WARNING: DO NOT ALLOW ANYONE
NEAR THE SKID STEER WHILE THE
ENGINE IS RUNNING AND THE SKID
STEER IS OPERATIONAL.
PART #86509972
9. CAUTION: DO NOT SPRAY ETHER
INTO AIR INTAKE. EXPLOSION AND
INJURY COULD RESULT.
PART #786286
10. DANGER: USE ONLY NEW HOLLAND CAB
JACK KIT TO
INSTRUCTIONS BEFORE TILTING CAB.
DO NOT REMOVE CAB HARDWARE
BEFORE JACK IS INSTALLED. FAILURE
TO DO SO MAY CAUSE CAB TO FALL
CAUSING SERIOUS INJURY OR DEATH.
PART #86521713
11. DANGER: LOCATED
TILTING JACK. NEW HOLLAND SKID
STEER CAB TILTING TOOL. READ CAB
TILTING INSTRUCTIONS AND USE WITH
PROPER MOUNTING
BEFORE TILTING CAB.
PART #86508506
TILT CAB. READ
ON THE CAB
BRACKETS
90-10
Copyright © New Holland