Pallet Fork - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

Op. 82 100 30

PALLET FORK

The pallet fork (shown) has a frame and guard as-

sembly, with different length forks available. The fork

pairs can be 36", 42", or 48" long. Also available is

a multi-fork block fork set for lifting blocks.

To adjust fork spacing, raise the lock pins, 1, and slide

the forks to the required spacing and relatch lock pins

into notches, 2.

To install or remove the forks from the frame, slide the

forks to the center of the frame at 1, and pick the end

of fork up to remove fork from frame.

Do not use a pallet fork attachment unless the

back guard is in good condition and properly

installed on the attachment frame.

Pallet Fork Capacity

WITH WEIGHT KIT

Max. Reach Height

2108 mm (83")

WITHOUT WEIGHT KIT

Max. Reach Height

2108 mm (83")

Capacities listed are LS140/LS150 with 10 x 16.5

tires at 3.5 bar (50 PSI), full fluids, 79 kg (175 lbs) op-

erator, 48" pallet forks w/back guard, weight kit two

27 kg (60 lbs) per side, per SAE rating specification

445 kg (980 lbs.)

408 kg (900 lbs.)

Table of Contents