New Holland LS140 Workshop Manual page 545

Hide thumbs Also See for LS140:
Table of Contents

Advertisement

Bulb Replacement
Clear lens with bulb #86533429
Bulb only (clear) #86533428
Red lens with bulb #9829515
Bulb only (red) #C6AB13465A
Op. 55 404 10
Front Road/Work Light
1. Facing the lens of the light assembly, push the
lens assembly to the left and lift the right side of
the assembly from the support.
2. Unplug the wire harness from the bulb,
unlatching the connector at 1, and sliding the
harness from the bulb.
3. Facing the back of the assembly, rotate the bulb
holder, 1, counterclockwise and remove the bulb
from the support.
4. Position the bulb so when it is locked in position
the connector, 2, is pointed down with the clip, 3,
to the right.
IMPORTANT: DO NOT touch the bulb during
removal and installation. The bulb may become
damaged or a premature failure may occur.
SECTION 55 - ELECTRICAL SYSTEM
55-120
1
2
Copyright © New Holland
173
174
3
175

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ls150

Table of Contents