Eic Engine Preheat - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 55 - ELECTRICAL SYSTEM

EIC ENGINE PREHEAT

The engine preheat is governed automatically by the

EIC based on coolant temperature and engine code.

Preheat is initiated when the ignition key is turned to

the "RUN" position and the cycle time will vary from

0 - 20 seconds.

Turn the ignition key to the "RUN" position, and the

EIC character display, 1, will show seconds

remaining for engine preheat time. The preheat

indicator light, 2, will be lit during the preheat cycle.

The operator should wait until the display zeros "0",

the indicator light goes off, and the audible alarm

sounds to start the engine. If the skid steer does not

start, re-cycle the engine preheat timer by turning the

ignition key "OFF" then "ON". This will restart the

timed preheat cycle.

Table of Contents