New Holland LS140 Workshop Manual page 453

If a fault occurs in the following monitored functions
a fault code will appear in the EIC character display,
1, accompanied by a five second audible alarm. By
turning the ignition key switch to the "OFF" position
the EIC will return to the normal operating mode. If
when the skid steer is restarted and the fault still
exists, the code will reappear with an alarm indicating
there is an open or short in that circuit. Contact your
New Holland dealer for assistance.
_______________________________________________________________________________________________
1
If a fault occurs in the following monitored functions
the EIC will signal the operator with a flashing light
accompanied by a five second audible alarm
indicating the filter(s) require service.
SECTION 55 - ELECTRICAL SYSTEM
2
55-28
1
FAULT
Hydraulic Boom/Bucket Solenoid
Engine Preheat Relay Coil
Fuel Solenoid
FAULT
1. Hydraulic Oil Filter
2. Engine Air Cleaner
Copyright © New Holland
17
CODE
(F0A)
(F03)
(F04)
18