New Holland LS140 Workshop Manual page 224

Hide thumbs Also See for LS140:

Table of Contents

Neutralizer Reassembly and Adjustment

1. Loosely install the blocks, 1, to the neutralizer

plate with 1/2" x 3/4" cap screws and large 1/2"

flat washers.

2. Slide the plastic guides, 1, into the slots on the

neutralizer plate.

3. Place the neutralizer plate, 2, on the plastic

guides and against the boss area on the bell-

housing cover at 3.

4. Insert front neutralizer plate support pins, 4, and

5. To assemble the neutral return spring assembly,

install the short spring retainer, 1, spring, 2, and

long spring retainer, 3, over shoulder bolt, 4.

SECTION 29 - HYDROSTATIC TRANSMISSION

Chapters

Table of Contents