New Holland LS140 Workshop Manual page 412

29. Install the front final drive chain, 1, over the inner
drive sprocket, 2, and the rear chain, 3, over the
outer drive sprocket, 4.
30. Install the axle housings, 1, and tighten the drive
chains. Refer to the "Axle" section of this manual
for details.
Axle retaining hardware: 190 N·m (140 ft. lbs.)
31. Clean the old sealer from the chain case opening
and cover. Place a bead of noncorrosive silicone
sealer around the chain case opening and install
the cover, 2.
32. Check the final drive oil level at the check plug,
3, and add SAE 10W-30 oil as required.
33. Replace all shields removed for repair.
34. Install tires and lower the loader to the ground.
Wheel bolt torque: 170 N·m (125 ft. lbs.)
SECTION 44 - AXLES AND WHEELS
44-29
Copyright © New Holland
65
66