Starter Motor Removal; Starter Motor Disassembly - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

STARTER MOTOR

Op. 55 201 50

1. The starter can be accessed through the right

engine side shield with the boom up or down or

from the operator's area with the seat raised.

2. To access the starter, 1, through the right engine

side shield, open the rear door, raise the top

engine side shield and remove the right engine

side shield.

If the boom is in the raised position, make sure

the boom is resting on the boom lock pins.

Never work under a raised boom unless it is

properly supported by the boom lock pins.

3. To access the starter, 1, from the front, raise the

seat and seat pan and securely latch in the raised

Never work under a raised seat unless it is

properly latched in the raised position.

4. Disconnect the negative (–) battery cable.

5. Remove the wires from the starter solenoid and

starter, noting their location.

6. Remove the starter retaining hardware and

remove the starter from the engine bellhousing.

SECTION 55 - ELECTRICAL SYSTEM

Chapters

Table of Contents