New Holland LS140 Workshop Manual page 470

1
FAULt - Fault/Warning history
With display showing "LOC_ _" for lock.
1. Press and release the "ARROW" switch, 1;
"dIAg" will appear in the character display. Then
press and release the "ARROW" switch again;
"SEtUP" will appear in the display, 2.
_______________________________________________________________________________________________
1
2. Press and hold the "OPEN BOOK" switch, 1, until
"FAULt" appears in the character display, 2.
SECTION 55 - ELECTRICAL SYSTEM
55-45
2
2
Copyright © New Holland
39
40