New Holland LS140 Workshop Manual page 179

The pump housing and needle bearing are
shown with the shaft removed. To remove
needle bearing, 1, press the bearing from the
inside after the cam plate has been removed.
The shaft and related parts.
1. Shaft
2. Snap rings
3. Thrust washers
4. Needle thrust bearing
10. To remove cam plate, 1:
a. Remove the #25 torx head screws, 2, and
cover plate, 3.
b. Remove O ring cover, 4; O ring, 5; and wash-
er, 6.
SECTION 29 - HYDROSTATIC TRANSMISSION
29-34
Copyright © New Holland
50
51
52