New Holland LS140 Workshop Manual page 631

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
3. Check the center dimension between the face-
plate pods and the overall outside dimension.
Inside Dimension 1:
Outside Dimension 2: 1122.4 mm (44-3/16")
Latch Pin Dimension 3: 850.1 mm ± 0.8 mm
CAUTION
Do not cut or grind the loader faceplate to adapt
any buckets or other attachments.
Do not cut or grind the loader faceplate latch
pins.
When attaching unapproved attachments, the
latch points on the attachment must meet the correct
dimensions and be strong enough to maintain the
correct dimensions during operation.
441.3 mm ± 0.8 mm
(17-3/8" ± 1/32" )
(33-15/32" ± 1/32") center
82-42
Copyright © New Holland
90