New Holland LS140 Workshop Manual page 250

The parking brake discs are connected to the hydro-
static motor drive sprocket assembly at 1. The park-
ing brake assembly is made up of two discs, 2, actua-
tor shaft, pads, 3, and control handle and linkage.
The hydrostatic system is used as the primary brak-
ing system, with the parking brake being used only
when the unit is stopped.
CAUTION
Always engage the parking brake before exiting
the skid steer.
SECTION 33 - BRAKES AND CONTROLS
1
33-3
1
Copyright © New Holland
4
5