Boom, Upper And Lower Link Reinstallation - New Holland LS140 Workshop Manual

Hide thumbs Also See for LS140:

Table of Contents

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)

BOOM, UPPER AND LOWER LINK

REINSTALLATION

1. If the upper and lower boom links and boom cylin-

ders were removed, attach the upper and lower

links to the ROPS before installing the main

boom assembly.

2. Install the lower link pivot pins, 1, through the

links and insert the tapered end of the pin into the

ROPS frame. Install the pin retaining hardware

and tighten, making sure the tapered pin is in-

serted into the ROPS straight.

3. Install the upper link pivot pins through the links

and insert the tapered end of the pin into the

ROPS post at 2. Install the pin retaining hard-

ware, 1, and tighten, making sure the tapered pin

is inserted into the ROPS post straight.

4. Position the main boom assembly over the load-

er ROPS, positioning the boom on the boom

5. Attach the upper link rear with tapered pivot pins

and retaining hardware at 1. Tighten the hard-

ware, making sure the pin is straight in the main

Chapters

Table of Contents