New Holland LS140 Workshop Manual page 346

Hide thumbs Also See for LS140:

Table of Contents

2. Inspect the control valve links for any obvious

damage, bends or twisting.

3. Inspect the auxiliary hydraulic hub arm, 1, the

boom hub arm, 2, and the bucket hub arm, 3, for

any deformation or cracks.

4. To disassemble hub arms, remove the roll pins,

4, from the hub arms and control shaft.

5. Inspect the control shafts, 5, for any obvious

damage or bends.

6. To remove control shafts, remove bolt, 1, secur-

ing shaft arm to pedal. Take note of the position

and number of any spacer washers or shims. Re-

move the nuts, 2, holding the bearings on the

pedal support. Separate the shaft from the pedal

and bearing.

SECTION 35 - HYDRAULIC SYSTEM

Chapters

Table of Contents