6. Drain the hydraulic reservoir.
a. Loosen the return line, 1, at clamp, 2.
b. Remove the return line at 3, and rotate the
line into a suitable drain pan.
7. Remove the suction line, 1, and cap to prevent
loss of oil.
8. Remove the pressure line, 2, and cap.
9. Remove the case drain line, 3, and cap.
10. Remove the gear pump retaining hardware, 4,
and remove the gear pump from the loader.
SECTION 35 - HYDRAULIC SYSTEM
35-56
Copyright © New Holland
72
73