Copyright © New Holland
SECTION 88 - ACCESSORIES
Op. 90 000
ARM PADS FOR CAB SIDE PANELS
The cab arm pads provide additional operator com-
fort and may be used separately or in combination
with the seat armrest.
The arm pads, 1, require gluing in place to the cab
side panels with Loctite
454 gel adhesive.
The area where the arm pads are to be located must
be cleaned thoroughly to insure a secure bond to the
cab side panel. If the area is not cleaned, the adhe-
sive will not adhere to the metal side panels. Clean
with methyl ethyl ketone, isopropyl alcohol, or equiv-
alent cleaning solvent that will not leave a residue.
7
NOTE: Position arm pads quickly because the adhe-
sive begins to bond in a few seconds.
CAUTION
Read the adhesive label warnings. Loctite 454 gel
is a superglue-type material and can bond skin,
eyes, etc. Use with adequate ventilation.
88-7