New Holland LS140 Workshop Manual page 337

Hide thumbs Also See for LS140:

Table of Contents

6. Remove the wiper seal, 1, O ring and backup

washer, 2, and inner seal and wear ring, 3, from

the cylinder head (gland), 4.

7. Remove the wear ring, 1, and seal, 2, from the

PARTS INSPECTION

1. Thoroughly clean all parts and remove any nicks

or burrs with a fine emery cloth.

2. Inspect the inner diameter of the barrel, 1, for ex-

cessive wear or scoring.

3. Inspect the threaded area of the barrel, 2, for

damaged threads that would prevent proper

tightening of the cylinder head.

4. Inspect the O ring seal area, 3, and remove any

burrs or nicks that could damage or prevent the

O ring from sealing properly.

SECTION 35 - HYDRAULIC SYSTEM

Chapters

Table of Contents