Op. 10 250 16
EXTERNAL OIL PIPE
1. Loosen and remove the two banjo bolts at the
cylinder block main oil gallery and cylinder head
assembly, 1.
2. Remove the line clamp, 2, from the fuel injection
pump.
Op. 10 106 20
ROCKER SHAFT ASSEMBLY
1. Loosen and remove nuts, lock washers, and flat
washers from the rocker pillar stud, 1. Lift the
rocker assembly, 2.
2. Remove the push rods, 3, and valve stem caps,
4.
Op. 10 101 21
CYLINDER HEAD ASSEMBLY
Loosen the cylinder head bolts, starting from the
center, in a circular pattern, using several steps of
equal torque. Remove the head.
SECTION 10 - ENGINE
10-27
Copyright © New Holland
27
28
29