New Holland LS140 Workshop Manual page 370

12. Remove the front light bezels and unplug the wire
harness from the bulb, 1.
13. Remove the rear window locking molding, 1, and
remove the window from the frame and molding.
14. Remove the retaining pin from the latch rod at 1,
and remove rod.
15. Disconnect the seat/seat belt wire harness from
the main harness unless previously unplugged.
Remove the seat pan support hardware at 2.
16. Unlatch the seat pan support at 3, and lift the seat
and pan support assembly from the loader.
SECTION 39 - FRAMES
4825-07
39-5
Copyright © New Holland
8
9
2
1
3
10