26. Attach lift chains to the front of the boom at 1,
through the box beam member.
CAUTION
Always use a suitable lifting device and chains or
straps to support the rops/boom assembly,
which weighs approximately 1800 lbs.
27. Attach lift chain at the rear of boom at 1.
28. Make sure the boom is below the boom lock pins,
the front and rear lifting chains are securely at-
tached, and the boom lock pins are engaged.
Raise the boom so the boom contacts the boom
lock pins as shown at 1.
SECTION 39 - FRAMES
39-9
Copyright © New Holland
20
21
22